Hitachi - Inspire the Next
Contact Us
Sullair

Find A Local Rep

+44 (0)191 404 6802

Single-Stage Industrial Rotary Screw Compressors

Sullair Single-Stage air compressors use a rugged, time-proven design for optimum performance with minimal maintenance. Featuring the proven Sullair air end, you can count on the Sullair Single-Stage for reliable continuous-duty performance. 

  • Broad Operating Range 
  • Superior Package Design
  • Premium Efficient Motor 

Models vary by region. Please contact your Sullair sales representative for more details.

Jump To:

Specs Contact Us
Single-Stage

Flow

795 – 1615 cfm
22.5 - 45.7 m³/min

Pressure

100 – 150 psi
7 - 10 bar

Power

200 – 350 hp
160 – 261 kW
  • Superior Package Design
    • SAE O-ring fittings 
    • Number of fittings reduced
    • Aftercooler 
      • Moisture separator 
      • Electric drain
  • Variable Capacity Sullair Air End 
    • Legendary Sullair Air End
    • Spiral Valve Technology
      • Matches output to demand  
      • Stabilizes system pressure 
      • Minimizes need for air receiver 
      • Extends package life 
  • Cooling Options
    • Air-cooled
      • Uses updraft coolers
        • Easy installation
        • Heat recovery capabilities 
    • Water-cooled
      • Uses shell and tube heat exchanger
  • Flange-Mounted Motor and Air End* 
    • Up to 5% energy savings over belt drive
    • Eliminates maintenance expense associated with V-belts
  • Premium Efficient Motor
    • Direct coupled design for extended bearing life 
    • 250,000-hour insulation life
  • Sullair Supervisor™ Microprocessor Controller
  • Multi-Stage Air-Fluid Separation
    • Dual nested Optimizer™ separator elements
      • Reduce fluid carry-over to less than 1 ppm as measured prior to aftercooler
      • Helps lower fluid costs
  • Optimalair® Inlet Filter
    • Includes remote air intake connection
    • Fine Fiber Technology—0.4 microns
  • Fiberglass Fluid Filter
    • Aircraft-quality media provides better filtration
    • Up to 20% more efficient than conventional paper elements
  • Bearing Fluid Reservoirs
    • Ensures fluid is available at start-up
    • Extends air life
  • Genuine Sullube®
    • 10,000-hour extended-life synthetic fluid

* Not standard on LS-25S

  • PristineFG™ Food Grade Compressor fluid 
  • Variable Speed Drive 
  • Spiral Valve Technology
  • Sound Attenuating Enclosure

Available models

60 HZ

CONSTANT SPEED DRIVE
FULL-LOAD CAPACITY*

  • LS-25S-250—250 hp (186 kW), 1075 to 1218 acfm (30.4 to 34.4 m³/min), 100 to 125 psi (7 to 9 bar)
  • LS-25S-300—300 hp (224 kW), 1330 to 1480 acfm (37.6 to 41.9 m³/min), 100 to 125 psi (7 to 9 bar)
  • LS-25S-350—​​​​​​350 hp (261 kW), 1460 to 1615 acfm (41.3 to 45.7 m³/min), 100 to 125 psi (7 to 9 bar) 

CONSTANT SPEED DRIVE WITH VARIABLE CAPACITY CONTROL
FULL-LOAD CAPACITY*

  • VCC-25S-250—250 hp (186 kW), 1075 to 1218 acfm (30.4 to 34.4 m³/min), 100 to 125 psi (7 to 9 bar)
  • VCC-25S-300—300 hp (224 kW), 1330 to 1480 acfm (37.6 to 41.9 m³/min), 100 to 125 psi (7 to 9 bar)
  • VCC-25S-350—​​​​​​350 hp (261 kW), 1460 to 1615 acfm (41.3 to 45.7 m³/min), 100 to 125 psi (7 to 9 bar) 

VARIABLE SPEED DRIVE
FULL-LOAD CAPACITY WITH VARIABLE CAPACITY CONTROL*

  • V-250S-250—250 hp (186 kW), 1085 to 1195 acfm (30.7 to 33.8 m³/min), 100 to 125 psi (7 to 9 bar)
  • V-250S-300—300 hp (224 kW), 1305 to 1400 acfm (36.9 to 39.6 m³/min), 100 to 125 psi (7 to 9 bar)
  • V-250S-350—​​​​​​350 hp (261 kW), 1435 to 1580 acfm (40.6 to 44.7 m³/min), 100 to 125 psi (7 to 9 bar)

50 HZ

CONSTANT SPEED DRIVE
FULL-LOAD CAPACITY*

  • LS-25S-200—200 hp (160 kW), 795 to 1010 acfm (22.5 to 28.6 m³/min), 100 to 150 psi (7 to 10 bar)
  • LS-25S-250—250 hp (186 kW),  980 to 1225 acfm (27.7 to 34.7 m³/min), 100 to 150 psi (7 to 10 bar)
  • LS-25S-300—300 hp (224 kW), 1305 to 1452 acfm (36.9 to 41.1 m³/min), 100 to 150 psi (7 to 10 bar)
  • LS-25S-350—​​​​​​350 hp (261 kW), 1438 to 1563 acfm (40.7 to 44.2 m³/min), 100 to 125 psi (7 to 9 bar) 

CONSTANT SPEED DRIVE WITH VARIABLE CAPACITY CONTROL
FULL-LOAD CAPACITY*

  • VCC-250S-200—200 hp (160 kW), 1010 acfm (28.6 m³/min), 100 psi (7 bar)

* Capacity per CAGI / PNEUROP PN2CPTC2 (Annex C to ISO 1217)

Off
Off
Off
Off

NEED HELP FINDING THE
RIGHT SOLUTION

INTERACTIVE GUIDE  
This site uses essential cookies for core functionality and analytics cookies to collect anonymous usage data. Click “Accept Cookies” to accept all cookies or “Cookie Settings” to choose which types of cookies you wish to accept. View our Privacy Policy.
Accept Cookies Cookie Settings

Use the checkboxes to select the types of cookies you want to accept, then press the “Save Settings” button. View our Privacy Policy.

  • Essential cookies enable core functionality of the site. These cannot be disabled.
  • Analytics cookies collect anonymous usage data to help us understand how visitors interact with the site and improve their experience.
Save Settings